How to make a gum paste flower
This is one of the cupcake decorations, that many ask about. It is also one of the gum paste flowers that I always have lots of for later use. The cutter that I have used here, are a Petunia flower cutter. I have it in three sizes and the one used here are the largest of the three cutters that I have.
Follow this tutorial and learn how to make a gum paste flower. Use them to adorn your cakes and cupcakes as you can never get to many of these sweet flowers!
This is what I use:
Petunia flower cutters ( I use the ones from Tinkertech Two: 435, 573 & 599)
Five petal silicone veiner
Cornstarch duster
Gel paste color
Lustre dust
Tylo glue
Non stick Board
Rolling pin
Painter’s palette
Soft paint brush for the lustre dust
Small paint brush for the tylo glue
Gum paste
Edible sugar pearls (optional)
Royal icing (optional)
Non-pareils (optional)
Step 1:
Color you gumpaste with the gel paste color. Roll out your gum paste into 2mm thickness and cut out the flowers. Cut out 5 flowers at a time.
Step 2:
Dust the silicone veiner with cornstarch. Place the cut out flower in the veiner and place the pointed veiner part on top.
Step 3:
Give the veiner a light push with the palm of your hand. Open the veiner and carefully take out the flower. Place the flower in a painters palette and let it dry completely. Continue with the rest of the flowers.
Note: Remember to dust the silicone veiner with cornstarch when required.
Step 4:
When the flowers are dry, take a soft brush and brush off any cornstarch on the flowers. Then take a soft paint brush and lightly brush the flower with lustre dust from the center and out.
Step 5:
If you like, you can glue a little edible sugar pearl in the center of the flower. Let it dry and you will now have a pretty decoration for your cake or cupcake?.
Step 6:
This is just an example on what you also can use for the center of the flowers: A sprinkle of Non-pareils or small dots of royal icing.
Tip!
The Petunia flower cutter is not the only one that you can use together with the silicone veiner. Five petal blossom cutters also makes pretty flowers.
Happy Caking!
Louise
1. cakebaker_cakemaker
May 12th, 2007 1:30 am
Thanks so much for your clear instructions to make these pretty flowers.
2. Anonymous
May 18th, 2007 3:34 pm
What do you use the tylo powder for?
3. kitchenangel
May 18th, 2007 3:43 pm
what do you use the tylo powder for?
4. Louise
May 18th, 2007 3:49 pm
Hmm thank you for beeing clever there;o) I simply just forgot to write about how I use it. But I have now edit the post. So pease look again.
5. Joanne
August 1st, 2007 12:01 am
Where do you buy the veiner?
6. Evayanti
August 7th, 2007 3:21 am
Thank you for sharing.
This is really helpful.
I’m new to this art
. How long can we keep the flower sugar? Do we keep in an air-tight container and refrigerate it?
Thanks in advance…:)
7. Louise
August 7th, 2007 7:03 pm
Hi evayanti,
When I make the flowers I always let them dry throughly and then I simply store them in an air-tight container. I have used some there was 4 month old and they’d still tasted fine.
8. Anonymous
September 5th, 2007 8:23 am
Hi Louise,
Where can I find the flower veiner and the small palette? Thanks.
9. Anonymous
September 5th, 2007 8:25 am
Hello again Louise, where did you find flower cutters?
10. Louise
September 6th, 2007 7:43 am
Try look here: http://www.cakejournal.com/2007/05/my-favorite-flower-cutters-and-veining.html There is a link to Global sugar art. I use mostly small 5-petal and the Petunia cutters with that veiner.
I think that you can find the “Painters palette” in a craft store.
11. craftyclaire
November 25th, 2007 9:49 pm
Wow, I just found your cake journal, and I’m so impressed. Thanks for the eay to use instructions
12. lisa
April 8th, 2008 6:04 am
Louise
Can you use the MMF to make these lovely flowers?
13. Louise
April 12th, 2008 7:53 pm
lisa: Yes you can. But it would be good to knead in some hardener so they will hold the shape.
14. sugarpink
April 13th, 2008 2:30 am
you r very kind for sharing the tips. . .
15. sugarpink
April 13th, 2008 2:34 am
i got one question, can i use gum paste to make the flower?
16. Louise
April 13th, 2008 8:27 pm
sugarpink: Yes you can use gumpaste aswell.
17. Jen
April 17th, 2008 3:01 am
I found your site yesterday and I can’t stop looking at it! Your work is absolutely amazing. So talented. I tried the PF on cupcakes and they didn’t turn out the greatest but I think I put too much batter in the cup. They didn’t make a pretty mound, more like a little mushroom! The icing is horribly sweet though. Is it normally like that?
Anyway, keep up the fantastic work! You are an inspiration!
18. Louise
April 17th, 2008 3:31 pm
Jen: I am glad that you found the way to my site:-) Yes PF is very sweet but I myself like it with a plain vanilla cupcake.
19. Tracy
April 28th, 2008 3:53 pm
Hi, I can’t seem to find where on the website you told me that you used a 1M for the swirl on the cupcake, but I tried it and I am so pleased. I think I was using a MUCH too small star tip. Thanks for improving my cupcakes from 3,000 miles away! Tracy
20. Louise
April 29th, 2008 9:47 pm
Tracy: I am so glad that it worked for you.
Happy cupcaking
21. MoDog
May 1st, 2008 4:51 am
Can you do a tutorial on sugar modeling figures?
22. ipoet
May 8th, 2008 9:44 am
where i can get the veiner like that?…
23. Louise
May 8th, 2008 10:30 am
ipoet: you can get it from Decorate The Cake: http://www.decoratethecake.com/store/WsDefault.asp?One=135
24. ipoet
May 12th, 2008 9:21 am
thank you for your information….
25. Tracy
June 17th, 2008 5:12 pm
Hi, I think you asked somewhere if any one else had any info about suppliers for the tinkertech cutters in the U.S. . A & H cake design (ahcakedesign.com) carries the whole tinkertech catalogue. Heidi, at that store, has been a very nice person with whom to work.
26. Debbie
June 19th, 2008 1:49 am
Beautiful cupcake. Would you please tell me what size petunia cutter you used to make the lovely flowers?
27. Louise
June 20th, 2008 1:27 pm
Tracy: Thank you for the note. I am sure many of the readers will find this helpful.
Debbie: I use the 23mm & 30mm petunia.
28. alicegop
June 26th, 2008 3:55 pm
THANK YOU! These are fantastic. You are so kind to share!
29. Louise
June 27th, 2008 10:59 pm
Alicegop:
30. Beverly
July 8th, 2008 10:58 pm
Hi Louise:
As there are several sizes of the Tinkertech petunia cutters, would you please share what size you use to make your sugar flower? Thanks.
Bev
31. Louise
July 12th, 2008 9:31 pm
Bev: I use the 23mm & 30mm most when I use the silicone veiner. But sometimes I also use bigger ones.
32. Игорек
August 1st, 2008 7:14 pm
Люблю посты в таком духе! Большое спасибо
33. laura
August 8th, 2008 12:04 pm
Thanks so much for your clear instructions and your mails.
34. Louise
August 12th, 2008 7:48 pm
laura: your welcome
35. lauren
August 31st, 2008 2:18 pm
i still do not understand how to make them
36. Louise
August 31st, 2008 4:05 pm
lauren: At what stage are you having problems?
37. Wendy
September 8th, 2008 10:19 am
Could you provide how much tylo glue to be used for kneading into the sugarpaste? Are there any ratios?
38. Louise
September 14th, 2008 10:18 pm
Wendy: well around 4oz and 1/2 a tsp tylo. I dont meassure i just add it a little at a time.
39. Goodbaker
September 16th, 2008 8:23 pm
Thank you!Thank you! This looks so easy to do I can’t wait to try it out on my next cake for this weekend.
40. Louise
September 23rd, 2008 10:14 pm
Goodbaker: Your welcome. they are so easy to make. This is my favourite of all times.
41. Sweet Sisters
October 16th, 2008 5:44 pm
Hi Louise,
I wish I can have 5% of your talent. I’m very new in this and I do not have much equipment and tools in hand. Can I use any 5 petal cutter (ex: rose cutter) for this? I’m from S’pore and it’s difficult to get any flower mold here. Any alternative we could use?
42. Louise
October 17th, 2008 12:35 am
Sweet Sisters: yes any 5 petal can be used. Only the biggers sizes can be trouble. You could just frill them with a bone tool and let them dry in a apple tray.
43. Nourah
October 17th, 2008 10:31 pm
hi louise
i wanna know how to make the fondant paste because i tried some recipies & they didn’t work
all the mextures became like a a syrup not a PASTE like yours
i’m dying to make a fondant flowers like yours ,
could u help me plzzz ?
44. Louise
October 19th, 2008 10:32 pm
Nourah: Try start out with ready made rolled fondant or gum paste. Or try out the MMF recipe (look under tutorials)
45. rochelle Phelps
October 31st, 2008 11:49 am
Thank you for the lovley flowers idea, i just got my first wedding cake order and made your flowers and they were a huge hit, thank you
46. Louise
November 11th, 2008 12:09 pm
rochelle Phelps: Im glad to hear that the flowers were a hit
47. Maz
November 12th, 2008 9:02 pm
Wow, looking for ideas to make a special birthay cake for my mum i stumbled on your blog and looked through some of your other pics too – amazing!
I’m inspired to attempt a version of the petunia flower cake and if my efforts turn out even a fraction as good i’ll be delighted!
You have a real talent, thank you so much for sharing
xx
48. Paula in Texas
November 20th, 2008 3:59 am
I just love that 5-petal flower!! Could you please tell me where or how I can get at least one of these cutters!!! I’m doing cupcakes for my niece’s 15th. birthday and these flowers are super perfect!!!
49. Louise
November 24th, 2008 1:09 am
Maz: Im sure your cake will turn out beautiful.
Paula: There are links to the cutters if you look under “This is what I use”
50. Carmen
January 2nd, 2009 7:07 pm
Gracias por toda la información que ponen y que tanto nos ayuda en el trabajo que hacemos.
Soy una enamorada de la decoración y cada día aprendo con Uds.
Un Abrazo para todos Uds en este nuevo año
51. Kristy
January 22nd, 2009 2:27 am
Louise,
I love to look at your work ! Your creations are so beautiful!
I have a question regarding the flowers pictured above on the cupcakes.
The problem that I run into is when I put fondant/gum paste decorations on iced cupcakes, the decoration softens ( and flatens) from the moisture in the icing…( no matter how long I let the decorations dry)…any suggestions?
Kristy
52. Natalie
January 28th, 2009 6:58 pm
Hi Louise,
I’m having trouble making these flowers with fondant. I added a little gumtex to it to make it harden but i’m having a hard time having them keep there shape. Any suggestions? I’ve followed your instructions, but when i put them in the palette they just sort of flatten out….
please help!!
thank you!!
natalie
53. Louise
January 30th, 2009 12:07 am
Kristy: Mix/knead in half a tsp of Tylo powder (gumtex) to your fondant. It will help the fondant dry “harder” and your decoration wont go soft that easy.
natalie: i dont have that problem and I always dries mine in that palette shown on the photo. How much gumtex do you use?
54. Katie
February 3rd, 2009 4:56 am
Louise, you have two different sized flowers on the cupcake – did you use the same veiner for both?
Also, what kind of icing did you use for your photo? It looks delicious!!
55. Louise
February 3rd, 2009 9:38 am
Katie: its the same veiner for both flowers and its just regular bc for icing.
56. Malena del Gallego
February 8th, 2009 2:09 pm
Dear Louise
I am new to the craft of creating sugar flowers. Have been reading on how to make them and notice there is a wide range of pastes to use. Can you please let me know which is the best recipe for them,ie. sugar paste, gum paste, a 50:50 mix of fondant/gum paste? I really don’t know which to use and of what purpose are all of them? Your help would be much appreciated as I have been asked to make the flowers of a wedding cake which is a couple of months.
Many thanks
Malena del Gallego
57. Louise
February 8th, 2009 11:07 pm
Malena del Gallego: I like to use a 50:50 mix of fondant & gumpaste or just kneading in a bit of Tylose/gumtex powder to my fondant. If I was making only sugar flowers like to use in a flower spray I would only use gumpaste because it is more flexible when making wired flowers.
But for roses, and smaller flowers not wired I just use fondant with gumtex.
58. Patricia
February 24th, 2009 8:57 pm
Hello Louise,
I am new to this cake/cupcake decorating, I am making cupcakes for my daughters wedding, I am using your cupcakes with the sugar flowers idea, I have been using the triangles for making the bags but I need a larger bag as the triangle only frosts about 3-4 cupcakes at a time, I went on the site of sugarcraft and they have differant bags available, do you prefere one over the other, also do you prefere a certain size? Any help would be appreciated
Thanking you in advance
Patricia
59. Louise
February 25th, 2009 10:51 am
Patricia: for frosting cc I use a large 14″ or 16″ and I have one only for buttercreams.
60. leah in miami
February 25th, 2009 8:45 pm
Hi Loise,
My sister discovered your website and all my sisters (and we are 8 girls in the fam) love baking! You are extremely talented and make beautiful creations. I googled flower veiners and can’t find them anywhere in america. Only veiners with leaves shaped. I bought the flower tool set but have no clue how to go about using it. I am great with my hands but wish someone could explain how to use it. If you know anyplace to purchase flower veiners or how this tool set is used and can explain on your blog would greatly appreciate! You are incrediable!!!!!!!!!
61. Louise
February 25th, 2009 10:03 pm
Leah in miami: If you click on the “pink” links in this post. Then it will take you straight to where you can buy this flower petal veiner and take you to another post with more links to different places to buy 5-petal blossom & Petunia cutters.
So far I have only showed how this flower veiner is used because it is my favourite piece of tool in my tool box:-)
Thank you for all the sweet words.
Louise
62. Clara
March 1st, 2009 7:43 pm
Hi Louise,
I love your site and it has inspired me to make my very own sugar flower cupcakes for my wedding! I would like to make the flowers ahead of time, but I was wondering if the tylose used made them inedible? I’ve read that gumpaste isn’t really intended to be eaten, so I’m a bit confused! Any help would be very much appreciated!!!
63. Louise
March 2nd, 2009 11:55 am
Clara: If you use regular rolled fondant (remember that some brands taste better than others, try and go for Satin Ice) I dont think it would harm to eat gumpast. This just get very hard quickly because it shall hold the shape.
I have made many flowers like in the post and all with tylose powder and yes they dry “hard” but after being on a cake/frosting it goes a little soft. I have not had problems eating it even though is was made weeks agoe. Just use a 1/4 to 1/2 tsp tylose to about 3 oz of fondant dont know what that is in pounds?
You can make them up to 1 month ahead of time. A good thing is to dry them over night in the small palettes and then pack them in a air
thight container.
Have fun with the project
64. Patricia
March 8th, 2009 4:19 am
Hello Louise,
When you make your cupcakes do you prefere the paper liners of the foil liners, have been experimenting with both for my daughters wedding, if I use white paper, the chocolate shows through and also the grease comes through, when I use foil and bake them on a cookie sheet like it says on the foil liner package they are not so perfectly shaped, what would you advise.
thanks so much
Patricia
65. Karen (UK)
March 9th, 2009 12:29 pm
Hi Louise, I love your site.
I have the same problem as Patricia. I find with my American recipes, which contain oil rather than butter/marg, the grease bleeds out of the case and also badly marks the cake box. I have only used the silver cases with a butter recipe so far, and they came out well shaped in my muffin pan (I didn’t use a cookie sheet). I will try and use them with an ‘oil’ recipe next time to see if they have the same grease problem and report back. Have you experienced this?
A quick question about the petunia flowers – do you have to thin the petals at all before placing in the mold or does it do it for you? I cannot decide whether to invest in the veiner or not! Many thanks.
66. Stephanie
March 11th, 2009 9:33 pm
I have a REAL newbie question here! lol Where can I find the recipe for sugar paste?
I can’t wait to give this a try!
Thanks
67. Louise
March 12th, 2009 1:22 pm
Patricia & Karen (UK): I find that many of the American recipes contain too much butter. So I always cut down the butter ratio a bit. I always bake my cupcakes in either paper or foil (not the wiltons ones) in a muffin pan.
Butter cake recipes tend to grease the paper case a lot! If you are baking chocolate CC’s then why not bake in brown paper cases?? http://acupcakery.com/chocolate-brown-cupcake-liners1.html
Karen do you know this site? http://stores.ebay.co.uk/Cakey-Makey_W0QQcolZ4QQdirZ1QQfsubZQ2d33QQftidZ2QQtZkm They also have a webshop: http://www.cakeymakey.co.uk/
About the petunia, I get the best result if I just roll the sugarpaste out 1-2mm, cut out and then place it in the veiner and press. Trust me, this is the tool you just can’t live without!!!
68. Karen (UK)
March 13th, 2009 9:54 pm
Hi Louise, thanks so much for your reply. I guess I’ll have to do some experimenting and see how moist the cakes come out if I reduce the oil quantities, or maybe do half oil half butter?
The cake case sites you’ve posted are really useful, especially the ebay one.
You have sold me, I’m going to purchase the veiner this weekend! You are a star. Thank you!
69. Ann
March 16th, 2009 11:26 pm
I just bought this veiner and cutter from Ebay..can’t wait to try it!!
Your work is gorgeous!! Thank you for being so kind as to share your tips and ideas with all of us.
70. pebbles
March 18th, 2009 7:27 am
are the flower for sale i would like to know where i can buy them
71. Louise
April 5th, 2009 2:05 am
Karen (UK):
you wont regreat it im sure 
Ann: Cool
pebbles: You can find different links to suppliers of cutter & veiner in the post
72. Louise
April 5th, 2009 2:07 am
Stephanie: Try search Google for sugar paste or rolled fondant and you will find many recipes for it.
73. Jan
June 8th, 2009 12:10 am
Hi…your cakes are fantastic, you are so so talented. I bought your ebook a while back and it is excellent. I tried making these flowers to add to my cupcakes and though they looked pretty good when I put them on the buttercream – the next day they had kind of melted. Maybe I didn’t put enough tylo powder in…would it be OK to put a bit more in and they would still be edible or did I maybe do something else wrong. Thanks for your help.
74. Louise
June 11th, 2009 11:39 pm
Jan: Whenever I make flowers for different decoration I always use tylo. Its hard to say how much Tylo I add its a feeling with the fondant. After the flowers have been made I let them dry for a few days. You can still eat them and sometimes they get a little softer. Its only with gumpaste roses those I would never eat.
75. Jan
June 13th, 2009 10:41 pm
Hi Louise – thank you very much for your helpful reply. I maybe have not been letting the flowers dry for long enough. I’ll keep on with the Tylo powder. Best wishes
76. G
June 22nd, 2009 10:44 pm
Hi Louise. Your tutorials are so helpful. THANK YOU very much! Keep it coming.
77. tanya
August 29th, 2009 9:14 am
Ive made sugar tulips and they’ve been drying for a week and they still want dry out is it because of the cold weather?
78. Louise
September 6th, 2009 10:10 pm
tanya: how do you store the tulips? You need to let sugar flowers dry at room temp and not in a closed box. I dry mine in my display cabinet.
79. claudia
November 5th, 2009 3:04 am
how far ahead can you make these flowers?
80. sarah.a
November 7th, 2009 12:21 am
Really great job louise and thanks a lot for posting all of your great work
81. Louise
November 11th, 2009 6:34 pm
claudia: I make these up to several weeks before use. I always have some stock.
82. remy
December 14th, 2009 7:48 am
Hi Louise, i would like to thank you for the inspirations and ideas you share here. I love your site its very helpful especially for the beginners like me.
83. Carlie
December 16th, 2009 3:11 am
Thank you Louise for such a wonderful website and tutorial!! My flowers are “drying” as I write this, so hopefully they will turn out ok. It is the first time I have used my cutters and veiner, and they were so cute I just wanted to keep making more! I am now hoping my sister gets engaged soon so that I can make the heart shaped cake you have a lovely photo of. Thank you so much!!
84. Jennifer
January 4th, 2010 8:00 pm
Hello, when using gumpaste, would I still need the CMC powder being that gum paste generally hardens itself?
85. Louise
January 5th, 2010 11:16 pm
Jennifer: No if you use gum paste then leave out the CMC.
86. Tracy
January 30th, 2010 7:46 pm
Louise, just a quick thank you for the info on how to make these flowers, I have only just discovered your site and its brilliant, keep up the great work!
87. Shannon
January 31st, 2010 3:01 am
I just made these flowers yesterday and plan to put them on cupcakes just like you did, for my daughter’s 2nd birthday. I used the Crystal Colors powder in pink and pale yellow and they turned out SO cute! I just hope my italian buttercream turns out and that my swirls look as nice as yours do! It’ll be my first attempt at all of it! Thanks for the fun ideas!
88. Louise
February 7th, 2010 9:41 pm
Shannon: Crystal colors are so brilliant to work with
89. Rosie
February 18th, 2010 9:37 pm
Awesome tutorial Louise thank you, you’re tha’ best!!!
90. Diana
March 9th, 2010 1:42 am
Oooo ~ I really like the flowers!!!
By the way Louise, how many pages does your beautiful book have?
91. beldandy
March 9th, 2010 2:44 am
TQ louise…
where can i get the silicone veiner?
92. B
March 9th, 2010 4:23 am
I really love your blog and tutorials.
93. Melinda
March 9th, 2010 3:56 pm
would this work if I used Fondant?
94. Natalie
March 9th, 2010 5:03 pm
Simply gorgeous flowers! Thanks so much for taking the time to create these tutorials- they are very much appreciated.
95. Natalie
March 10th, 2010 7:11 pm
Hi Louise,
Thank you for all the great tips and tutorials! I have ordered a veiner and am patiently waiting, can’t wait to use it!
96. suri
March 10th, 2010 11:41 pm
would these flowers work with marzipan or is it too soft
97. Lidia
March 11th, 2010 10:52 am
Hello, I wanted to tell you that you are very good and I will follow you forever … I want to know where are these silicone molds to shape of the flower … I have here with me … I find it difficult to give some potrsti website addresses, I live in Italy (Potenza-Basilicata) and sometimes it’s hard to find these things … you help me?
thank you very much
Lidia
98. ConnieT
March 12th, 2010 12:46 am
Hi Louies,
What is covering the cupcake buttercream or fondant?
99. Scarlett
March 12th, 2010 5:01 pm
I really enjoy reading your website and admire your work. Absolutely beautiful! I plan on searching for a petunia cutter and veiner to try my hand at making flowers as gorgeous as yours!
100. suma
March 13th, 2010 5:29 pm
Louise!!This is awesome!!! I could not find Tylo powder here in India. Is it OK to use CMC(sodium carboxymethyl cellulose) or is it the same thing?? Please let me know. And the proportion to the fondant for a small quantity.
Also, I have some packets of Wilton fondant. How long will it keep opened and unopened? Should I store it in the fridge? Its very precious for me as we don’t get it easily here. Help!!
101. Louise
March 15th, 2010 11:44 pm
beldandy: You can get the silicone veiner from here:
http://www.decoratethecake.com/store/Default.asp
Melinda: You can use it with fondant also. You may just need it to dry for a little bit longer.
Suri: No marzipan is too soft, but you can try?
Lidia: http://www.sunflower-sugarart.co.uk/eGallery/details.php?image_id=46 You can get the Petunia cutters from here: http://www.design-a-cake.co.uk/ look under TinkerTech Two.
ConnieT: BC & fondant
suma: Yes CMC is the “same” so just use that. I just add it sparingly to the fondant. You can feel the fondant “thicken” dont add to much. It will harden over time.
You should go by the expiration date on the packets. If it is opened store it well in a plastic bag and then in a airthight container.
102. suma
March 16th, 2010 5:39 pm
Hi Louise! Thanks for the reply! Would like to know if the CMC has to be added to the rolled fondant directly, before I shape it? And when u say ‘poured fondant’ is it the regular rolled fondant heated? Please let me know. Appreciate your taking time to reply to all the queries here. You are very, very generous with your knowledge!!
103. Karin
March 18th, 2010 3:33 pm
Hi Louise
Love your web-site, thanks for all the advice. I have 2 questions, in the past you had a reference to a 4 leaf flower (Hydranga) cutter, where did you get that from? I don’t seem to find your tutorial on this one any more.
And secondly, why do you use a mix of sugarpaste and flower paste with the veiner? Do you get more of an impression from the veiner? I have been using just flower paste and found that the veining effect was not as pronounced as in yours.
Thanks for your advice.
Regards
Karin
104. Louise
March 21st, 2010 11:18 pm
suma: You add it before you shape it and before coloring the fondant. Poured fondant is eiter made from scratch or from a ready made product like in liquid or powdered form. You can with some (not all works) use the regular rolled fondant. I like the ready made version the best.
Karin: I have not made a Hydrangea tutorial. But I got the cutter together with the veiner from here: http://www.globalsugarart.com/product.php?id=19020&name=Hydrangea%20Blossom%20Set%20(SV-020)%20by%20Sunflower%20Sugar%20Art
In the beginning I did use a mix of sugar paste & flower paste when making these. I still use that combo for other types of flowers. But I also just like to use plain sugarpaste with a little tylo powder mixed in. Maybe you have better luck with it this way?
105. Karin
March 26th, 2010 12:03 pm
Hi Louise
Thanks for the advice, I will try the Tylo, love your effect.
As to your comment about your nozzle for the fur clogging up, this may telling you something you have already tried. But between uses, put it on a sponge damp with water, that prevents the clogging between uses, even if it is just for a couple of minutes. You can also use it to whipe the nozzle on between uses. Cleanliness being next to godliness on this one I am afraid. But I love your bunnies, they are just so sweet.
106. Lise'
March 27th, 2010 3:10 pm
Hi, I received my mold and cutter in the mail and made some of these type of flowers yesterday in cornflower blue. Thanks for the idea!
107. mina
April 20th, 2010 8:22 pm
This is awesome and I will use it Thanks
108. Betina
April 25th, 2010 10:34 pm
Hi
You show 3 different cutters and a veiner. I have tried to find it on the Internet without look. Can you tell me where I can buy the cutters and veiner?
Betina
109. Louise
April 25th, 2010 11:12 pm
Betina: You can get the veiner + cutters from Specialkøbmanden
110. vanessa
April 26th, 2010 10:50 pm
i simply want to thank you 4 being kind enough to teach us this beautiful craft. Thank u and God bless
111. Kelli
May 5th, 2010 12:12 am
Hi Louise,
I am making some cup cakes for a wedding and wanted to add your lovely flowers. A couple of questions. First, you mention using gum paste and that it tasted fine. I have read other places that gum paste is not intended to be eaten? Do you have a recipe that tastes good and is consumable as I do not want guests to have to remove the flower before eating.
Thanks so much for this tutorial. Warning: NEWBIE here!
Thank you so much!
112. Louise
May 13th, 2010 10:28 pm
Kelli: You can eat gum paste only I would not because it dries hard (I never eat the decorations). It can be confusing with all the different terms for the materials and so. But most knows GP so that is why I use that for my tutorials. If you dont want to use GP, You can just use rolled fondant kneaded with tylo powder or just plain rolled fondant, no problems eating it.. Just make sure that the decoration allows to dry and firm. I hope this was any help
113. Jessica
June 7th, 2010 9:02 pm
Hi Louise,
Just wanted to say I LOVE your work, you are a very talented lady. Unfortunately I cannot find the veiner in the UK. Do you have any idea where I can get one as I really want to be able to make these flowers?
Thanks so much!
114. Louise
June 7th, 2010 9:24 pm
Jessica: You can get it from here (look under double sided silicone veiners) http://www.sunflower-sugarart.co.uk/main.php It comes with a 5 petal cutter.
115. Claire
June 26th, 2010 10:49 am
Hi, I know i might be on the wrong section, not sure where to leave my question.
i’ve been asked to make some gumpaste poppies and I was wondering how to attach the stamens to the flower, any advice?
Many thanks
Claire
116. Louise
June 30th, 2010 11:31 pm
Claire: Take a look at this made by a friend of mine: http://www.sifbeth.dk/poppytut.html
Make sure that you check out the other tutorials as well.
117. Cherry
July 4th, 2010 10:29 pm
awesome work…thank u louise ans]d suma (from india) as i am also from india and reading your comments and louis e replys have helped me a great deal..thank u once again
118. Claire
July 10th, 2010 10:57 am
Thanks Louise. Will do. I’ve tried to make some and they one of the trickest flowers to make so far, because each petal has to be wired! and if you don’t get them in the right shape straight away, then they don’t tend to work into the flower!!!
Oh well, I’ll keep at it.
Thanks again,
C
119. Ariana
July 22nd, 2010 8:11 pm
I am looking for a recipe to make cake flowers that look like satin flowers (or ribbon). Can you help?
120. Dipen
August 18th, 2010 3:00 pm
My gum paste is made with GT, Glucose and Lime juice. The dough was very soft and rubbery but my prob is after cutting them in shape it starts melting.. Pls help…